Please sign in to access this page

MiniFRC Robot (REEFSCAPE)

MiniFRC Robot (REEFSCAPE)

5 devlogs
23h 22m
•  Ship certified
Created by Ben Park

This is a robot that was designed to compete in MiniFRC 11 REEFSCAPE hosted by team 4561 the Terrorbytes. This robot completes most of the tasks of the game using a double jointed arm with a pinching claw on the end. I went into this challenge wanting to make the simplest robot while keeping it aesthetic and clean. Skip to match 25 in this livestream to watch my robot https://www.youtube.com/watch?v=GdWHozYs5Jw ! You can also see an early test with the demo

Timeline

I updated my readme and shipped my project. If you want to see CAD then that is here https://cad.onshape.com/documents/fc9ed77a7adb13bcfa6bf56a/w/2b8403704d22d43573d8c70c/e/163b8b695d540bf9279041ed?renderMode=0&uiState=6873cf3de93cb855a29dacd7
There is also the youtube livestream in the previous devlog. Match 25 of that livestream shows my robot at its peak performance. Thank you for checking out my project, its been a lot of hard work but I think it was plenty worth it :)

Update attachment

Ship 1

1 payout of shell 275.0 shells

Ben Park

over 1 year ago

Ben Park • Covers 4 devlogs and 23h 11m

I just finished the competition yesterday and it went really well. Due to some early battery issues, I was alliance 7 first pick but by then I had everything figured out and carried us to playoffs semifinals where we lost against the first alliance. It was really fun and I had one of the more complex and aesthetic robots out there, still maintaining good performance. Stream link is here: https://www.youtube.com/live/GdWHozYs5Jw

Update attachment

I have finished my code and I'm now well into the testing and tuning phase. For the code, I have stuck to my goal of keeping it easy to read and easy to navigate so I can debug it and so other people can copy parts for their own robots. I dont really have much else to say, but the attached video shows off the features of the robot

I have started the coding process for my robot. It is being programmed in ArduinoIDE and uses the pestolink-receive and NoU3 libraries. I am utilizing a state machine type format to make my code easy to read and easily debug-able.

Update attachment

This devlog entry will detail the CAD process not including physical assembly and prototyping.

The first thing I did was brainstorm. I came up with an archetype of robot fairly early on because I knew I wanted to base it off of a real robot. This archetype is a double jointed arm with a claw at the end. After I committed to this, I decided to make a layout sketch so I know I will be staying within the frame perimeter rules and the robot would be game legal while still being able to reach the highest scoring pole. The sketch is attached. Then I just needed to get to work. I took the drive base design from my friend who is also building one of these robots. I would just have to modify it to be the right size. After that, I went on to make the servo mount and support mount. These attach with two 10-32 bolts to make repair and maintenance easy. Now with the servo mounted, I can design where my arm is going to be positioned. I opted to make it mount with a servo horn sandwiching the 3d printed peice for a secure fit. I kept going with the arm, mirroring that mount on the top for the servo that controls the second joint. I made the second segment of that arm and started on the claw. The claw is based off of a design I found online https://speedyfpv.com/products/robotic-clamp-gripper-claw-bracket-servo-controlled-mounted-grabber?variant=8596747223091 . It uses a linkage connected to a servo horn to turn the rotational movement to a constrained linear movement. With the claw done, The robot was almost complete. I just needed to add holes for wiring and the electronics. I am using zipties mounted to holes in the various parts for a nice clean and organized look.

Update attachment