PowerBank LED
This is a simple powerbank with a powerful led and ATtiny202
Followers
No followers yet
Ship Your Project
Get ready!
Once you ship this you can't edit the description of the project, but you'll be able to add more devlogs and re-ship it as you add new features!
Timeline
I finished the PCB. I had to change/rewire a few components, but it should be finished! Now time to do the case
Today I started with searching an IC that I could use for the powerbank. I wanted a USB PD cabable one, but they were quite a bit harder to use, more expensive, and needed multiple cells, so I ended up with a 1S 5V/3A powerbank. it will be enough to fast charge a phone. And I will also be able to use the voltage to power the led easily, as it is always on.
I went with the ATtiny202, BQ25895 and AL8860MP ICs.
I finished the schematic with all the components. Hope it works
