hackpad

I just finished routing my pcb. Some traces got in the way of the ground fill, which took a while to fix, and on top of that there were so many silkscreen DRC violations :(

I laid out the new pcb design

I made the schematic a lot neater, fixed the oled pinout issues and made the rgbs reverse mount so they can be put under the keys. I also changed the matrix to include the rotary encoder and made it 2x3

I finished routing the pcb! However, the OLED pins might be wrong so ill fix that later

I made the PCB outline, and now I get to route everything.

Schematic Done! I decided to change it to a 2x3 keyboard layout so I could use a pin for the OLED display (which will be used to display stats and info)

I wired the key switches together. I'm planning on having a volume knob and an oled screen